Clik here to view.
DIY soldering robot
Here’s Brian Dorey’s completed project the DIY soldering robot project: The DIY soldering robot which we have been building in our spare time over the past few months is now working and we have been...
View ArticleClik here to view.
Oktopod: Dev Kit for Your Robo-ideas!
Oktopod Studio – Development Tools for Mechatronics, Robotics and Automation. Oktopod Studio is a development platform for mechatronics, robotics and automation, which enables creating and controlling...
View ArticleClik here to view.
Matchbox car
Shane has been working on making small robots and made a prototype of a matchbox car, a robot car that fits inside a matchbox: This build consists of a tiny DC motors ripped from a pair of 9g servos,...
View ArticleClik here to view.
Maximo Robot Arm – for kids and even big kids
The Maximo Robot Arm is the greatest way to discover robotics. Accessible, fun and affordable, Maximo is designed for everyone. Maximo Robot Arm comes with a laser-cut acrylic body. It was designed to...
View ArticleMakerarm: The Robot That Can Make Anything!
A complete digital fabrication system for makers everywhere: 3D print, laser, carve, plot, assemble, pick/place + more on your desktop! Makerarm: The Robot That Can Make Anything! – [Link] The post...
View ArticleMC9RS08KB4CFK Minibot
The Minibot is a small autonomous robot vehicle that uses phototransistor that can detect lightness patterns on the ground to follow the edges of the dark lines. It has a MC9RS08KB4 MCU, coin cell,...
View ArticleClik here to view.
Arduino “Pick N Place” Android Robot
Sameer tipped us with his latest build of an arduino robot which is controlled by an Android smartphone using Bluetooth. Pick N Place robot is a basic level robot for beginners and leaders to learn...
View ArticleClik here to view.
DIY Mini Quadcopter with 3D-Printed Frame and Custom Firmware
Simon D. Levy designed and build a mini quadcopter with 3D printed frame and custom C++ firmware. See the full project notes including bill of materials and more photos on the link below, and check...
View ArticleClik here to view.
Drone The Quadcopter
Sameer Gupta tipped us with his latest project, a DIY Quadcopter: “Drone The Quadcopter” is an featured UAV. I design my project with F450 arm in X-mode design. The full operation takes place via a...
View ArticleClik here to view.
Building A Quadcopter For Newbie
Drones are one of the rising technologies in the world and it became very popular that we see it in news on places that have armed conflicts, aerial photography like GoPro drones and even for customer...
View ArticleClik here to view.
Deltu, An Interactive Delta Robot
Robots intelligence is going beyond borders and it may outsmart humans in some common games. Right now, these robots have their own personalities and if you are not skilled enough, they might get upset...
View ArticleClik here to view.
Nanobots Fight Cancerous Cells
Researchers from Polytechnique Montréal, Université de Montréal and McGill University have just achieved a spectacular breakthrough in cancer research. They have developed new nanorobotic agents...
View ArticleClik here to view.
Controlling A Robotic Arm By Gestures Using Kinect Sensor & Arduino
B.Avinash and J.Karthikeyan had developed a robotic arm that mimic their moves using a Kinect sensor with MATLAB Simulink and an Arduino. The arm was built based on servo motors that replicate the...
View ArticleClik here to view.
Program a mBot With Scratch And Arduino
Makeblock was founded in 2012 in Shenzhen as the world’s first open-source robot and programing platform. With more than 400 mechanical components, electronic modules, and software tools, the company...
View ArticleClik here to view.
Dobot M1, All-in-One Multifunctional Robotic Arm
Shenzhen Yuejiang Technology Co. Ltd (“Yuejiang”) is a leading robot arm solution provider in China. Yuejiang is established in July 2015 in Shenzhen, China by 5 dedicated robotics engineers with the...
View ArticleClik here to view.
XPlotter, The All-In-One Plotter, Engraver and Laser Cutter
XPlotter is an affordable and easy to use desktop plotter, Laser cutter and engraver. It is designed to create a new definition of plotter. By integrating the laser engraver and cutter into the...
View ArticleClik here to view.
CTRL, The Industrial Robot On Your Desktop
CTRL the robot is a desktop-sized robot arm that can do a lot! It enables your computer to perform manipulation of real objects via software and gives you access to technology that has been locked away...
View ArticleClik here to view.
Anyone Can Build A Robot Arm With MeArm Pi
Mime Industries launches Kickstarter campaign to fund their Raspberry Pi powered robot arm kit that’s simple enough for kids to build. Mime Industries launched a crowdfunding campaign to fund the...
View ArticleClik here to view.
Niryo One, Your Next Affordable 6-Axis Robotic Arm
Two French engineers who are passionate about innovative use cases made out of new technologies and building accessible and collaborative robot, are now mixing last technology progresses in mechanics,...
View ArticleClik here to view.
Robot Core – The Ultimate Raspberry Pi Robot Controller
The Robot Core, which is a robot control board for the Raspberry Pi and Arduino, brings many different elements into one awesome package. It allows you to efficiently control motors, servos, and read...
View Article